Havahart 1025 Instruction Manual

Browse online or download Instruction Manual for Unknown Havahart 1025. Havahart 1025 Instructions / Assembly User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Live Animal Two-door Cage Trap Instructions
Models 1020, 1025, 1030, & 1040
Check the Trap--Occasionally the cage will shift
due to shipping. Please examine the cage
carefully.
Cage should not be damaged or bent.
Bait pan should move freely
Door locks should move easily from locked
position over-top horizontal wire (illustration
1).
Camouflage should not interfere with
operation of trap
If the trigger rods do not move downward
freely, pull the looped trigger rod outward
away from the cage keeping it aligned
horizontally with the top of the cage.
With door locks in the open position, check that the
doors can be opened by gently pushing down on
trigger rods. Notice that trigger rod with offset loop
is above straight trigger rod, so pushing down loop
rod opens both doors (illustration 2)
Setting the Trap
1. Turn the door locks to the open position
(illustration 1).
2. Push down on the straight trigger rod to open
door.
3. While holding door open, place bait on the bait
pan. See back for bait suggestions. When finished,
close door.
4. Push down on the offset loop on the looped
trigger rod to open both doors (illustration 2).
5. Position the flat end of the looped trigger rod
under the flat end of the bait pan trigger, so that
both doors are held open and the bait pan is level.
(illustration 3).
6. Turn door lock knobs so that both door locks
rest on doors (illustration 4).
Illustration 1
Illustration 2
Illustration 3
Page view 0
1 2

Summary of Contents

Page 1

Live Animal Two-door Cage Trap Instructions Models 1020, 1025, 1030, & 1040 Check the Trap--Occasionally the cage will shift due to shipping. P

Page 2

7. Set and trip cage several times to be sure the cage is working properly. Trip trap using a pen or pencil, sticking an end through the side of the

Comments to this Manuals

No comments